No. 03720 minHome Fixes

How to assemble flat-pack furniture

Published 28 September 2026. Everyday skill.
Mark it once you can do it without this page open.
The short answer

To assemble flat-pack furniture, open the box on a soft floor, check every part against the list before you start, sort the screws and dowels into cups, and read the whole booklet through once. Build loosely, leaving screws a turn short until the frame is square, then tighten. Tall pieces get anchored to the wall with the anti-tip kit.

How to do it

  1. Cut the box open along its seams and lay the panels on a rug or the flattened box so they do not scratch.
  2. Count every panel and hardware bag against the parts list, and stop to request anything missing before you begin.
  3. Sort the fittings into cups or a muffin tin, labeled with their letters from the booklet.
  4. Read every step once before starting, noting which way round the finished edges face.
  5. Drive screws and cam locks by hand or with a drill on its lowest clutch setting.
  6. Leave screws a turn loose until the frame is assembled, then square it and tighten everything.
  7. Nail the thin back panel on last, which squares the frame.
  8. Fit the supplied anti-tip strap and anchor tall pieces into a stud.

Common mistakes

  • Throwing out the booklet or spare parts, which you need to move or repair it later.
  • Overtightening with a drill and stripping the particleboard.
  • Installing a panel with its unfinished edge facing out.
  • Skipping the wall anchor on a tall bookcase or dresser.

Quick self-check

3 questions. Your last score is kept in this browser.

1. What do you do before the first step?
2. Why leave screws a turn loose at first?
3. What must a tall dresser or bookcase have?

Teach this to someone

A one-page sheet for showing a friend, a roommate or a kid: what to say, what to show, and one question to check it landed.

Words on this page

Published .