No. 02410 minThe Toolbox

Eye, ear and dust protection basics

Published 28 September 2026. Everyday skill.
Mark it once you can do it without this page open.
The short answer

Basic workshop protection means impact-rated safety glasses for anything that cuts, drills or hammers, ear plugs or muffs for power tools and mowers, and a well-fitted dust mask or respirator for sanding and cutting. Keep gloves away from spinning tools. If your home was built before 1978, have old paint tested for lead before you sand or scrape it.

How to do it

  1. Buy safety glasses marked as impact rated and wear them for drilling, hammering, cutting and yard work.
  2. Keep ear plugs or earmuffs by the power tools and the mower so wearing them is automatic.
  3. Use a fitted disposable respirator for sanding, drywall dust and sawdust, and press the nose clip to seal it.
  4. Wear work gloves for rough materials, but take them off near drills, saws and anything that spins.
  5. Test paint in homes built before 1978 for lead with a kit or a professional before sanding or scraping.
  6. Open windows and use a fan pulling air outside when you use paint, glue or solvents indoors.
  7. Replace scratched glasses and crushed masks rather than making do.

Common mistakes

  • Wearing ordinary sunglasses and thinking they stop flying debris.
  • Skipping ear protection because the job is only a few minutes long.
  • Wearing loose gloves near a drill bit or saw blade, where they can be caught.
  • Dry sanding old paint of unknown age.

Quick self-check

3 questions. Your last score is kept in this browser.

1. When should you take gloves off?
2. What should you do before sanding paint in a house built before 1978?
3. Which eye protection is right for drilling?

Teach this to someone

A one-page sheet for showing a friend, a roommate or a kid: what to say, what to show, and one question to check it landed.

Words on this page

Published .